ANSI/BIFMA X5.5 - 1998 桌子測試
發布時間: 2009-2-13 15:57:44
ANSI/BIFMA X5.5 - 1998 Desk/Table Products - Tests
　     
4    Unit static load tests 靜態載荷測試
5    Top load ease test – cyclic(20,000 cycles)  
桌面疲勞載荷測試(20,000 循環)
6    Lock tests 鎖測試
7    Extendible member cycle test (50,000 cycles)  
抽屜疲勞測試(50,000 循環)
8    Out stop test (15000 cycles) 抽屜外擋塊測試(15000循環)
9    Rebound test 抽屜反彈測試
10    Racking test 抗搬運扭曲能力測試
11    Drop test 跌落測試  
12    Leg strength test 桌腿強度測試
13    Stability tests 穩定性測試
14    Caster durability for mobile pedestals (2500 cycles)  
可移動基座腳輪疲勞測試(2500循環)
15    Adjustment tests for adjustable key board surfaces and input device supports (2500 cycles)  
可調節鍵盤托架和輸入裝置支撐板疲勞測試(2500循環)
16    Interlock tests 互鎖系統強度測試
17    Hinged door tests 帶鉸鏈的門的測試
17.2    Strength test for vertically hinged doors
門強度測試(鉸鏈垂直安裝)
17.3    Wear and fatigue tests for all hinged doors (20000 cycles)  
門疲勞測試 (20000循環)
17.4    Slam open/closed test for vertically hinged doors  
大力打開/關閉門測試(鉸鏈垂直安裝)
17.5    Drop test for horizontally hinged doors – cyclic (10,000 cycles)  
自由跌落測試(鉸鏈水平安裝)(10,000循環)
18    Cycling tests for receding doors 伸縮門疲勞測試
18.2    Wear and fatigue test for horizontal receding door (20,000 cycles)
門疲勞測試(水平伸縮)(20,000 循環)
18.3    Wear and fatigue test for vertical receding door (20,000 cycles)  
門疲勞測試(垂直伸縮) (20,000 循環)
19    Sliding and roll front door tests  
滑動門和卷門測試
19.2    Wear and fatigue test (20,000 cycles)  
疲勞測試
19.3    Slam test for doors which free fall open or closed  
大力打開/關閉門測試(靠重力關閉/打開)
19.4    Slam open and closed test for doors which do not free fall  
大力打開/關閉門測試(不靠重力關閉/打開)
20    Door latch test  
門插銷測試
21    Durability test for desks and tables with casters (2,500 cycles)  
桌子腳輪疲勞測試
22    Work surface adjustment tests  
桌面高度調節機構測試
22.2    Vertical adjustment test (4000cycles)  
垂直調節疲勞測試(4000循環)  
22.3    Horizontal adjustment test (4000cycles)  
水平調節疲勞測試(4000循環)
23    Force stability tests for tall desk/table products  
高度>1067mm桌子穩定性測試
24    Dislodgment tests for tall desk/table products  
高度>1067mm的桌子搬運性能測試
25    Pull force test  

東莞標檢產品檢測（STC檢測及認證）
Lemon lu 呂蒙
營業主任
STC 客服熱線: 400-886-8338
傳真: +86 769 8111 9009
手機: +86 13751274074 電郵:Lemon_lu@hkstc.com.cn
網址: www.dgstc.org
地址：廣東省東莞市大朗鎮富民南路68號