產品描述：

擠出機螺桿使用屏障段和混合段，機筒擁有新型溝槽。所有這些新型設計是為了增加塑化和混練效果。特殊設計的HDPE(PP,ABS)籃式膜具，使溶解溫度更低，擁有好的混合效果，低的機頭壓力，并有好的穩定產量。

采用特殊設計的冷卻和定徑系統，使用水循環冷卻HDPE(PP,ABS)原料，適合以上原料的冷卻。特殊設計可以擁有穩定的直徑尺寸和圓整度，可以適合生產厚壁管的需要。

特殊設計的真空定徑箱，可以確保穩定的直徑尺寸和圓整度，使用速度控制系統，使牽引速度穩定。

整條生產線采用PLC控制，液晶屏幕控制面板，是操作簡易方便。可以增加色標擠出機，使生產的管材擁有色標線。

產品介紹：

1.配合單螺桿擠出機，適合PE樹脂的擠出，產量高，最高產量1000公斤每小時。

2.本生產線采用合理的設計，采用安全生產設計，獲得CE安全認證。

3. PE管材直徑范圍16mm-800mm ,可以換算成英寸制，符合客戶的特殊要求。

技術參數

The screw of the extruder equipped with barrier unit and mixing structure, and the barrel owns new style grooves. All of these offer good plastification and mixing effect. Special design of basket die head of for HDPE(PP,ABS) large diameter pipe with thick wall offer lower melting temperature, good mixing, lower pressure of cavity ,and stable production.

Special design for sizing and cooling system by using film and water ring to cool HDPE(PP,ABS)material, which can fit for the requirement of HDPE(PP,ABS).And the design can ensure the stability of diameter and roundness when producing the pipe with thick wall.

Special design vacuum sizing tank can ensure the stability of size and roundness, Speed controllers are used in extruder, haul-off to offer stability and precision.

The whole line adopts PLC control system and large liquid crystal screen, which makes the operation very convenient. The line can be equipped with another extruder used for extruding the mark line.

Detailed Product Description

1.single screw extruder, very suitable to process PE resin with high capacity, max capacity  1000kg/h

2.The production line adopts reasonable design, absorbing safe producing technology, acquiring CE certificate.

3.Diameter range is 16mm-800mm, which can be changed into inch standard to meet clients special requirement.

Technical data